TIMEleSS Multigrain Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Search for peaks ======

Once your processed your images, removed your background, etc, you are ready to extract peaks.
Searching for diffraction spots in usually performed using [[software:peaksearch|peaksearch]].

To do so, you should look at some random peaks from several images by zooming in (in [[software:fabian|Fabian]]) and check out their intensity. Try to estimate a threshold value above which you have a peak and no junk. The threshold should separates peaks from background (everything above the threshold value is a peak, everything below is background). 

You can also define several threshold values and see the result.

==== Peak search script ====

You can then start the [[software:peaksearch|PeakSearch]] algorithm:
  peaksearch.py -n stem -f first_image_number -l last_image_number -t threshold1 -t threshold2  -t threshold3 etc
  
You are working with a dataset in which the background has not been removed in a previous operation, you can add the option ''-d background'' where //background// is the name of you background file. Typically, this could be the median that you calculated at some point.

If you already removed the background (in the diamond spot removal step, for instance), you should not remove any background anymore. This would remove the background twice!

Full example
  peaksearch.py -n ../Data/data -f 0 -l 111 -d ../Data/median.edf -t 20 
in which
  * ../Data/: path to the folder with the .edf files,
  * data: the stem (common part) of the .edf files;
  * 0: number of the first .edf file,
  * 111: number of the last .edf file,
  * ../Data/median.edf: name and path of the median image,
  * 20: a threshold over which to identify peaks (you can request multiple thresholds with multiple -t options).

There are other parameters you can apply. To get a full list:
  peaksearch.py -h

==== Merging peaks ====

There is a command to merge peaks extracted with different thresholds into a single peak file, I believe, but I can not remember how to do so.
 
==== Evaluating results ====

To check the outcome of the peak search, you can load the peaks which were found into [[software:fabian|Fabian]] and see if they match the actual peak positions. 

To do this, you have to go click on //CrystTools// --> //Peaks// --> //Read peaks// and choose the //.flt// file which PeakSearch just created. They should appear as red circles on the diffraction image. 

You can switch on/off the diffraction spots by clicking on //CrystTools// --> //Peaks// --> //Show//.

Below is an example of Fabian showing a diffraction image in Fabian after background processing and artifact removing as well as the same image with peaks overlay after a peak search.

[{{:processing:diff-1345-diamond-removed.jpg?300 |Diffraction image in Fabian after background processing and artifact removing)}}][{{ :processing:diff-1345-peaks.jpg?300|Same image showing peaks after peak search }}]